Advanced Program


Download: PDF, ZIP


Session A1: Machining Technology (I)
Room 1
Time: 15:15-16:45  Sep. 30, 2014
Session Chair: Prof. Yung-Tien Liu
Paper ID Paper Title
S0034 The study of laser machining on acrylic by image processing
Xu Kun-Ming, Su Qin-Ru, Lin Jun-Ming, Hong Ren-Jue
S0036 The development of knurling for ultrasonic composite machining
Kuen Ming Shiu, Hung Rung Shih, Jhong Wei Huang, Yu-Chai Li
S0041 Effects of Focusing Characteristics on Penetration Depth for Moving Electron Beam
C. Y. Ho, Y. H. Tsai, and C. Ma
S0050 Compensation Cutting for Aspheric Ultraprecision Machining Based on Response Surface Methodology
Yung-Tien LIU and Liangchi ZHANG
S0055 Control of Cutting Force by Fuzzy-Logic during Rough Turning Operation
Josuet Leoro, Syh-Shiuh Yeh
S0111
(Moved to C6)
Influence of turning insert groove geometry on chip breaking performance
Ruei-Yang Kuo, Jiunn-Jyh Junz Wang



Session A2: Metal Forming
Room 2
Time: 15:15-16:45 Sep. 30, 2014
Session Chair: Dr. Alexandrov Sergei
Paper ID Paper Title
S0038 The strain rate intensity factor in plasticity with special reference to the generation of narrow hard layers near frictional interfaces in metal forming
Alexandrov Sergei
S0042 Study of different parameters effects on the hollow hip joint stem process
Dyi-Cheng Chen, Jheng-Guang Lin
S0098 Circular Metal Rods Roll Forged into a Lens Shaped Cross-Section with One Stage Roll Created by VeraCAD
Kuang-Jau Fann, Jin-Tien Hsieh and Hermann Eratz
S0134 Extrusion Die Design for Tubes with Hardness Gradient
Yeong-Maw Hwang, Yu Chen, Kai-Siang Jhuang
S0117 Characteristics of advanced high strength steel sheets under cyclic reversed bending
Yao-Chih Liu, Sin-Liang Lin, Heng-Kuang Tsai, Kuan-Ming Li, Fuh-Kuo Chen, Yi-Kai Lin



Session A3: Monitoring and Quality Analysis in Manufacturing
Room 3
Time: 15:15-16:45 Sep. 30, 2014
Session Chair: Dr. Johannes K. Chiang
Paper ID Paper Title
S0047 Economic Manufacturing Quantity Setting By Considering Control Chart, Process Quality Level, and Tolerance
Chung-Ho Chen
S0083 Effective Operation Tuning for Local Clustering Organization (LCO) in TSP
Yohko Konno, Hidenori Kawamura and Keiji Suzuki
S0015 Application of Critical-Siphon Theory to Fastest Deadlock Controller to Enhance the Quality of Flexible Manufacturing Systems
Johannes K. Chiang and Yi Ting Liou
S0043
(Moved to C6)
Measurements of tilt error and eccentric error of rotary stage
Yi-Tsung Li, Wen-Po Sun and Kuang-Chao Fan
S0016 Design and Characterization of Auto-focusing Sensing System Based on Dual-confocal Optical Configuration
Jyun-Yi Yang, Chuan-Chen Kuo, Chien-Sheng Liu, Chia-Ming Jan, Po-Chi Hu and Chung-Li Tsai



Session A4: Micro- and Nanostructures, Devices and Systems
Room 4
Time: 15:15-16:45 Sep. 30, 2014
Session Chair: Prof. Woei-Shyan Lee
Paper ID Paper Title
S0017 Fabrication of nickel-coblt alloy micro through-holes using micro electrical discharge machining (μ-EDM) and micro electroforming
Chih-Yi Hung and Cheng-Kuo Sung
S0019 Dielectric Resonator of B2O3-doped 0.4Nd0.96Yb0.04(Mg0.5Sn0.5)O3-0.6Ca0.8Sr0.2TiO3 Ceramic System for Application in Microwave Devices
Yih-Chien Chen, Jing-Yu Fu, Chih-Hung Li, and Hua-Xian Liu
S0026 Load dependence of nanoindentation behaviour and phase transformation of annealed single-crystal silicon
Woei-Shyan Lee and Shuo-Ling Chang
S0100 A Study of Micro Fabrication of Precise Micro Optical Wave-Guides by Application of UV-LIGA
Chun-Ting Lu, Chih-Hung Li, Shi-Chang Tseng
S0113 Pitch-adjustable Arrayed Patterns by Colloidal Lithography
Cyun-Jhe Yan, Franklin Chau-Nan Hong



Session A5: Smart Feed-Drive Systems
Room 5
Time: 17:00-18:30 Sep. 30, 2014
Session Chair: Prof. Shang-Teh Wu
Paper ID Paper Title
S0022 The Experimental Observation of Temperature Rising and Thermal Deformation for a Hollow Ball Screw Feed Drive System
T.C. Kuo, Y.H. Wang, W.T. Wu, A.S. Yang, W.H. Hsieh
S0023 A FEM Technique for Predicting Thermal Deformation of a Ball Screw System
H.H Hsu, S.Z Chai, A.S Yang, W.H Hsieh, T.C Kuo and Y.C Hwang
S0027 Vibration and contact-force control of a two-axis manipulator
Shang-Teh Wu and Dong-Han Jhuang
S0028
(Moved to C6)
Detection of Ball Screw Preload Loss Using Vibration at Ball Pass Frequency
P. C. Tsai, C. C. Cheng, Y. C. Hwang
S0030 Contouring Control for Multi-axis Machine Tools with Learning Control
Roekrit Sukumalchitkul, Shyh-Leh Chen, and Yu-Chi Chang
S0089 Influence of Rotational Speed on the Temperature Rise of Ball Screw
Yeau-Ren Jeng, Po-Lin Yeh, Li Ying Tan, Yu-Xian Huang



Session B1: Machining Technology (II)
Room 1
Time: 17:00-18:30 Sep. 30, 2014
Session Chair: Prof. Albert W-J Hsue
Paper ID Paper Title
S0059 Ultrasonic Assisted High Efficiency Electrical Discharge Machining (EDM) and its Gap Status Viewed from Spatial-Time Relationship
Albert W. J. Hsue, C. Y. Wang
S0072 Fabrication of ITO-free organic photovoltaics using micro-contact printing
Jia-Ru Xu, J.-W. John Cheng, Jeng-Rong Ho, Chang-Pen Chen, Yeh-Min Lin
S0107 Study of Improvement of Water Splitting Process by TiO2-CMK- composite photocatalyst under Visible Light Irradiation
Wei Hsuan Hung, Sz Nian Lai
S0069 Effect of cryogenic treatment on thermal exposure and wear resistance during bone drilling
Jen-Chou Hsiung, Cheng-Min Huang, Chih-Kun Hsiao, Hung-Shyong Chen, Huang-Kuang Kung



Session B2: Analysis of Manufacturing Process
Room 2
Time: 17:00-18:30 Sep. 30, 2014
Session Chair: Prof. M. Y. Tsai (Co-session Chair: Prof. Cheng-Chi Wang)
Paper ID Paper Title
S0093 Nonlinear dynamic evaluation and analysis of extreme short air bearing system via novel hybrid method
Cheng-Chi Wang
S0099 Chemical Mechanical Polishing of Single-Crystal Silicon Carbide
M. Y. Tsai, S. M. Wang, C. C. Tsai and T. S. Yeh
S0124 Dynamic Characteristics of a Spindle with different Spacer Clearances
Jui-Pin Hung, Yong-Jun Chen, Kung-Da Wu, Tzuo-Liang Luo
S0133 Expansion of Microtubes using a Die: Experimental and Theoretical Investigation
Tsung-Chia Chen and Wei-Kai Ceng
S0140 A study on Application of Grey Prediction Model in Machining Super-alloy
Shao Hsien Chen



Session B3: Precision Engineering and Manufacturing
Room 3
Time: 17:00-18:30 Sep. 30, 2014
Session Chair: Prof. Song-Jeng (Isaac) Huang
Paper ID Paper Title
S0077 Effect of particle size and particle percentage of AZ61/SiCP magnesium matrix micro- and nano-composites on their mechanical properties due to extrusion and subsequent annealing
Song-Jeng Huang, Yi-Jhang Wu , Jheng-Yang Huang
S0085 Analysis in the image distortion for laser galvanometric scanning system with different beam profiles
Pei-Ming Yang and Yu-Lung Lo
S0120 Development of Tribological Analysis Model for Cold Rolling Process
Yeau-Ren Jeng, Yhu-Jen Hwu, Jian-Ting Lee
S0122 A Preliminary Analysis on Tail Pinch in Finishing Rolls Using Finite Element Method
Jong-Ning Aoh, Pai-Chen Lin, Han-Kai Hsu, Ming-Fa Chen, Wei-Yi chien
S0123 Investigation on the asymmetric friction of rolls during hot rolling
Jong-Ning Aoh, Han-Kai Hsu, Kai-Hung Lien1,Wei-Zei Peng, Yen-Liang Yeh



Session B4: Intelligent NC Machining
Room 4
Time: 17:00-18:30 Sep. 30, 2014
Session Chair: Prof. Chen-Han Lee
Paper ID Paper Title
S0045
(Moved to D5)
Feed rate optimization based on cutting force analysis for 5-axis sculptured surface milling
Peng Xu, Ko Jen Mei and Rong Shean Lee
S0068
(Moved to C6)
Smooth Tool Orientation Optimization Consider Collision Avoidance for 5-axis Machining with Ball-end Cutters
Chen Li, Tang Kai
S0086 Tool-path B-spline fitting based on energy minimization and progressive iterative approximation method
Shanshan He, Changya Yan, Daojiang Ou, Chen-Han Lee
S0088 A Design of CNC Architecture Based on Cloud Computing
Enming Hui, Guotao Ding, Chenhan Lee, Jianzhong Yang, and Yang Liu
S0126 The Application of CAD based Robotic CAM In Structural Steel using Plasma Cutting
Shen-Tnug Huang, Jen-Chung Hsiao



Session B5: Intelligent Sensing, Control and Communications for Manufacturing
Room 5
Time: 17:00-18:30 Sep. 30, 2014
Session Chair: Prof. Huang Chen Lee
Paper ID Paper Title
S0058 Performance Evaluation for Synchronous Multi-axis Motion Control Based on EtherCAT DC Scheme
Chih-Chao Wen, Jie-Chen Lin,Yuan-Sun Chu
S0087 An M2M System for Monitoring Machine Tool using Intelligent Sensor System and Cloud Data Base
Huang Chen Lee
S0090 An integrated acceleration/deceleration interpolation algorithm for high speed machining
M. S. Tsai, Y. C. Huang, Y. Lee
S0103 Implementation of an iterative learning control using C++
Yu-Ting Kao and Peng-Sheng Chenb
S0104 A Efficient and User Friendly High-Level Control for Five-Axis Machining
Jen-Chieh Chang and Rong-Guey Chang
S0108
(Moved to D5)
A Genetic Algorithm-Based S-Curve Acceleration and Deceleration for Five-Axis Computer Numerical Control Machine Tool
Tzyy-Chyang Lu and Shyh-Leh Chen



Session C1: Mechatronics and control
Room 1
Time: 10:30-12:00 Oct. 1, 2014
Session Chair: Prof. Liang-Kuang Chen
Paper ID Paper Title
S0018 Integrated nonlinear model-based fault diagnosis and fault tolerant control for mechanical systems
Sunan Huang, Ben M.Chen and Feng Lin
S0032
(Moved to C6)
Effect of Flexible Links of Parallel Robot Manipulators
Eileen Chih-Ying Yang, Ming-Hsien Yen, You-Hua Yang
S0033 Control of Contact Force during Trajectory Tracking via Machine Vision and Force Measurement
Liang-Kuang Chen and Cheng-Ying Liu
S0094 Hardware-in-loop Testing of An Active Magnetic Bearing System
Seng-Chi Chen, Ta-hsiang Hu, Dinh-Kha Le
S0132 NC Simulation for Adaptive Look-Ahead Interpolator with On-line Collision Detection
Hong-Tzong Yau, Chia-Hao Chang, Tsan-Jui Yang, Jiun-Ting Lin



Session C2: Emerging Manufacturing Technologies
Room 2
Time: 10:30-12:00 Oct. 1, 2014
Session Chair: Prof. I-Ling Chang
Paper ID Paper Title
S0112 Manufacture Technology for multifunctional Transparent Nanocomposite Coatings
Cyun-Jhe Yan, Chun-Chia Yeh, Ke-Fong Li, Franklin Chau-Nan Hong
S0114 The microstructural analysis on shape memory properties of Ni-Al alloys
I-Ling Chang, Chin-Chen Hsu and Ta-Hsiung Chao
S0062 Theoretical Modeling and Manufacturing of a Linear Variable Filter
Cheng-Hao Ko, Kuei-Ying Chang, You-Min Huang
S0044 Design of Multi-Recess Hydrostatic Journal Guide
Jing-Chi Tzeng
S0080 Numerical Simulation of Laser Cladding Powder Feeding Process
Hsin-Luen Tsai and Wei- Lun Tsai



Session C3: 3D Printing
Room 4
Time: 10:30-12:00 Oct. 1, 2014
Session Chair: Prof. Chung-Wei Cheng
Paper ID Paper Title
S0021
(Moved to D5)
Direct 3D printing of metal parts with hierarchical micro/nano structures
C.W.Cheng, D.Y Lin, C.W. Chien, C.C. Lin, C.S. Chuang, J.B. Horng
S0110 Freeform-microstructure-controllable additive manufacturing process for bulk metallic glass
Wei-Chin Huang, Chuan-Sheng Chuang, Ching-Chih Lin, De-Yau Lin, Chung-Wei Cheng, Wen-Peng Tseng, Ji-Bin Horng, Chi Y.A. Tsao
S0138 Development of Multi-Material Powder-Based 3D Printer - NCKU V6.0
Te-Yi Liu, Chun-I Cheng, Wei-Tsu Weng,Wei-Hsiang Lai
S0129 Production of Gas-Atomized Aluminum alloy Powders for Metal Additive Manufacturing Process
Muh-Rong Wang, Yang-Sheng Huang, Wei-Chieh Tseng, Kuan-Lan Lai
S0139 Methodology of Support Structure Generation in Additive Manufacturing
Ming-Wei Liu, Wei-Hsiang Lai, Shi-Jian Tang
S0091 Comparative Analysis of SLA 3D Printing Technology Based on USPTO and TIPO Patent Informatics
Amy J.C. Trappey, Charles V. Trappey, Yu-Hui Wang, Jasmine T.C. Tung and Kurt Lee



Session C4: Intelligent Manufacturing System Design and Analysis
Room 5
Time: 10:30-12:00 Oct. 1, 2014
Session Chair: Prof. Ming-Chyuan Lu
Paper ID Paper Title
S0102 Analysis on processes control parameters of a CNC machine tool
Bo-Wei Huang, Yao-Ji Lu and Jau-Liang Chen
S0109 Development of a miniaturized temperature sensor for cutting temperature estimation
Kuan-Ming Li, and Yin-Chih Liao, and Jia-How Chang
S0118
(Moved to C6)
A study of the CNC parameter tuning criteria according to the machining purposes
Ben Fong Yu, Jenq Shyong Chen
S0119
(Moved to D5)
Intelligent diagnostics of roller bearing fault under fluctuant rotation speed
T. Y. Wu, C. H. Lai and T. C. Chang
S0121 Study of AE based Weld Quality Monitoring in Nd:YAG Laser Thin Plate Butt Welding
Kun-Chieh Chien, and Ming-Chyuan Lu



Session C5: Advanced Testing and Analysis Methods for Manufacturing
Room 3
Time: 10:30-12:00 Oct. 1, 2014
Session Chair: Prof. De-Shin Liu
Paper ID Paper Title
S0024 Study on nonparallelism between linear guides for a feed drive system with developed sensing modules embedded on a ball screw
Feng Guo-Hua, Wang Chia-Chun
S0070 Tool condition monitoring and remaining life prediction based on image processing and linear regression
Jun-Hong Chen, Pei-Ju Chiang
S0084 Study of Contact Stress in Ball Skew by Digital Image Correlation Method
Zhen-Yu Yang, Hseuh-Dong Liu, Pai-Chen Lin
S0115 Contact Analysis of a Single Nut Ball-Screw System
De-Shin Liu, Nung-Chin Hung, Chuen-Ren Wang, Ting-Nung Shiau



Session C6: Best Student Paper Award
Room 6
Time: 10:30-12:00 Oct. 1, 2014
Session Chair: Prof. Shyh-Leh Chen
Paper ID Paper Title
S0118
(Moved from C4)
A study of the CNC parameter tuning criteria according to the machining purposes
Ben Fong Yu, Jenq Shyong Chen
S0043
(Moved from A3)
Measurements of tilt error and eccentric error of rotary stage
Yi-Tsung Li, Wen-Po Sun and Kuang-Chao Fan
S0028
(Moved from A5)
Detection of Ball Screw Preload Loss Using Vibration at Ball Pass Frequency
P. C. Tsai, C. C. Cheng, Y. C. Hwang
S0068
(Moved from B4)
Smooth Tool Orientation Optimization Consider Collision Avoidance for 5-axis Machining with Ball-end Cutters
Chen Li, Tang Kai
S0032
(Moved from C1)
Effect of Flexible Links of Parallel Robot Manipulators
Eileen Chih-Ying Yang, Ming-Hsien Yen, You-Hua Yang
S0111
(Moved from A1)
Influence of turning insert groove geometry on chip breaking performance
Ruei-Yang Kuo, Jiunn-Jyh Junz Wang



Session D1: Machine Design and Analysis
Room 1
Time: 14:00-15:30 Oct. 1, 2014
Session Chair: Prof. Jeng-Nan Lee
Paper ID Paper Title
S0131 Application of Clustering Strategy and Parallel Processing to the Large-Scale PCB Drilling Path Planning
Hong-Tzong Yau, Chien Chiu, Jun-Xu Huang and Yen-Kun Lin
S0065 Designs of Frame Structure and Supporting System for CNC Machines
Jinn-Jong Sheu, Yi-Chen Chang and Bao-Sun Wang
S0061 Development of a System in Translating Ladder Diagram to Instruction Lists of Programmable Logical Controller
Yung-Chou Kao, Chun-chieh Wang, Mau-Sheng Chen, Po-Jung Hsu, Ling-Haw Jang,Yi-Fan Wang, Jung-Chung Yeh
S0064 Surface Reconstruction and Five-axis Machining for the Inducer of Centrifugal Pump
Jeng-Nan Lee, Min-Jhang Shie, Chyouhwu Brian Huang, Hung-Shyong Chen and Huang-Kuang Kung
S0075 Negative-stiffness-mechanism Design Using Topology Optimization
Y. H. Kuo and C. C. Cheng
S0060 The Analysis of Ground Vibration Induced by High Speed Rail Train
Bo Wun Huang, Jung-Ge Tseng, Huang Kuang Kung, Yun Pu, Xue Qing Cheng, Xiao Qian Zhang, Wei Yu Liu, Yu-Xian Qiu, Pin Ren Chen and Ren-Zh Lu



Session D2: Dual-Use Technologies for Advanced Systems and Materials
Room 2
Time: 14:00-15:30 Oct. 1, 2014
Session Chair: Dr. Chin-Horng Yau
Paper ID Paper Title
S0029 Application of Improving Sample Entropy to Measure the Depth of Anesthesia
Shang-Ju Wu, Nien-Tzu Chen, Kuo-Kuang Jen
S0052 The development of high-performance thermoelectric generator with the heat sink applied technology
Jinn-Shing Lee, Wei-Tzer Hsu & Chin-Horng Yau
S0053 Applying essential methods of systems engineering to develop mobile broadband vertical solutions- A case study
Tzu-Ming Chan
S0056 Operation analysis of regional micro-grid electricity storage system
Chein-Hao Chen, Chih-Hsien Chung,Tsung-Jung Wu, Chi-Sheng Wu
S0081 The research on total life-span applications of power lithium ion batteries for electric vehicles
Wen-Chen Lih
S0013 Using Max-min Range Method for Raising the Accuracy of One-class Classifiers
Chi-Kai Wang, Wen-Hao Tseng, Jia-Jyh Yan, Chorng-Shyan Lin



Session D3: Cloud Manufacturing Technologies for Machine Tools
Room 3
Time: 14:00-15:30 Oct. 1, 2014
Session Chair: Prof. Chao-Chun Chen
Paper ID Paper Title
S0071 Development of Cloud-based Wheel-Design Process Planning Service with Ontology Inference for Machine Tools
Chao-Chun Chen Min-Hsiung Hung, Yen-Ju Tsai, & Chi-Yin Lin
S0073 Development of Swing Classification Scheme for Lathe Spindle with Loading
Yu-Yung Li, Haw-Ching Yang, Hao Tieng and Fan-Tien Cheng
S0074 Development of a Multiuser Model Creation Service for Machine Tools based on Private Cloud
Min-Hsiung Hung, Yu-Chuan Lin, Chia-Chun Tu, Chun-Fan Wei, Fan-Tien Cheng
S0101
(Moved to D5)
Web-based Multi-axis 3D Machining Simulation and Servicing System
Yung-Chou Kao, Sheng-Jhe Chen, Mau-Sheng Chen



Session D4: Biomedical Applications
Room 4
Time: 14:00-15:30 Oct. 1, 2014
Session Chair: Prof. Yun-Che Wang
Paper ID Paper Title
S0066 Fast Registration of 3D Dental Models for Intraoral Scanning
Chia-Hsiang Wu and Po-Chi Hu
S0067 Error Evaluation of Electromagnetic Guidance for Urinary Tract Repair
Chia-Hsiang Wu, Han-Ting Jhang and Chien-Chen Chang
S0051 Dynamic viscoelastic properties of soft biological materials under bending and torsion
Yun-Che Wang, Chih-Chin Ko and Li-Ming Shiau
S0125 A comparison study on different wavelength of laser dental scanning
Chung Li Tsai, Po Chi Hu



Session D5: Best Paper Award
Room 5
Time: 14:00-15:30 Oct. 1, 2014
Session Chair: Prof. De-Shin Liu
Paper ID Paper Title
S0108
(Moved from B5)
A Genetic Algorithm-Based S-Curve Acceleration and Deceleration for Five-Axis Computer Numerical Control Machine Tool
Tzyy-Chyang Lu and Shyh-Leh Chen
S0045
(Moved from B4)
Feed rate optimization based on cutting force analysis for 5-axis sculptured surface milling
Peng Xu, Ko Jen Mei and Rong Shean Lee
S0021
(Moved from C3)
Direct 3D printing of metal parts with hierarchical micro/nano structures
C.W.Cheng, D.Y Lin, C.W. Chien, C.C. Lin, C.S. Chuang, J.B. Horng
S0119
(Moved from C4)
Intelligent diagnostics of roller bearing fault under fluctuant rotation speed
T. Y. Wu, C. H. Lai and T. C. Chang
S0101
(Moved from D3)
Web-based Multi-axis 3D Machining Simulation and Servicing System
Yung-Chou Kao, Sheng-Jhe Chen, Mau-Sheng Chen